You wish to use a Pavy universal remote to operate your devices. In that scenario, you must configure your preferred universal remote control with one of the following codes.
Following, the code lists are step-by-step instructions for programming your Pavy Universal Remote using the provided codes as well as two backup methods in case the first method did not work.
Try a different code if the first one doesn’t seem to work. We add new codes to our listings on a regular basis.
Contents
Pavy Universal Remote Codes for LG TV
- 619
- 700
- 910
Pavy Universal Remote Codes List
Brand Name | Codes |
---|---|
Admiral | 500, 501, 610, 614, 615,902 |
Advent | 911, 932, 933 |
Aiko | 900 |
Akai | 601 |
AOC | 103, 601, 617 |
Apex | 000, 604, 618 |
Audiovox | 100, 101, 900, 901 |
Belcor | 617 |
Bell&Howell | 611, 620 |
Bradford | 901 |
Brockwood | 617 |
Broksonic | 614, 902 |
Candle | 601, 619 |
Celebrity | 605 |
Changhong | 618 |
Citizen | 601, 619, 900, 903 |
Clairtone | 103 |
Concerto | 619 |
Contec | 103, 901 |
Craig | 901 |
Crosley | 301, 303 |
Crown | 901 |
Curtis Mathes | 100, 102, 301, 400, 401, 402, 405, 500, 603, 606, 611, 619, 620, 621, 903 |
CXC | 901 |
Daewoo | 100, 101, 617, 900 |
Daytron | 617 |
Dumont | 617, 700 |
Durabrand | 201, 614, 615, 914, 918 |
Electroband | 103, 605 |
Emerson | 101, 103, 200, 201, 620, 901, 902 |
Envision | 601 |
ESA | 201, 601, 901, 903 |
Fisher | 620, 801 |
Fujitsu | 300, 615 |
Funai | 201, 615, 901 |
Futuretec | 901 |
GE | 100, 200, 202, 400, 401, 402, 405, 607, 608, 802 |
Gibralter | 601, 617, 700 |
Goldstar | 601, 607, 617, 619 |
Grundy | 615, 901 |
Haier | 914, 918 |
Hallmark | 607 |
Harvard | 901 |
Hitachi | 005, 606, 611, 916, 619 |
ILO | 921, 925 |
Infinity | 301 |
Inteq | 700 |
Insignia | 201, 301, 303, 614, 909, 919, 920, 934 |
JBL | 000, 301, 604, 618 |
JCB | 605 |
JC Penny | 202, 400, 402, 405, 601, 607, 608, 609, 617, 800, 903 |
JVC | 701 |
KEC | 901 |
Kenwood | 601, 617 |
KLH | 618 |
KTV | 103, 601, 901 |
Konka | 001, 002, 003, 304, 904 |
LG | 619, 700, 910 |
Logik | 611 |
Luxman | 619 |
LXI | 301, 400, 402, 607, 609, 620 |
Magnavox | 301, 302, 303, 601, 615, 617, 803, 905, 906, 907, 908, 909 |
Majestic | 611 |
Marantz | 301, 601 |
Matsushita | 004, |
Megatron | 606, 607 |
MEI | 103 |
Memorex | 004, 104, 607, 611, 614, 615, 620 |
MGA | 104, 500, 601, 607, 617 |
Minutz | 608 |
Mitsubishi | 104, 500, 601, 607, 617 |
Motorola | 500, 802 |
MTC | 103, 601, 617, 619, 903 |
Multitech | 901 |
NAD | 603, 607, 609 |
NEC | 601, 617, 619 |
Nikko | 601, 607, 900 |
Noshi | 800 |
NTC | 900 |
Olevia | 923 |
Onwa | 901 |
Optimus | 004, 603, 620 |
Optonica | 500, 610 |
Orion | 614, 615, 902 |
Panasonic | 004, 202, 610, 802 |
Philips | 301, 601, 617, 803, 905, 906, 907, 908, 909 |
Philco | 301, 601, 606, 614, 617 |
Pilot | 601, 617 |
Pioneer | 600, 603 |
Polaroid | 400, 910, 913, 915, 917, 920 |
Portland | 617, 900 |
Prism | 202 |
Proscan | 400, 402 |
Proton | 102, 607 |
Pulsar | 617, 700 |
Quasar | 004, 202, 610, 802 |
RadioShack | 400, 402, 607, 610, 617, 619, 620, 621, 901 |
Rhapsody | 103 |
Roomconx | 614, 615, 902, 924 |
Runco | 601, 616, 700 |
Sampo | 601 |
Samsung | 601, 607, 617, 619, 903, 930 |
Sansui | 614, 615, 902 |
Sanyo | 620, 801, 931 |
Scotch | 607 |
Scott | 607, 615, 617, 901, 902 |
Sears | 201, 301, 400, 402, 607, 609, 615, 620, 622, 801 |
Sharp | 500, 501, 610, 929 |
Sharp (LCD) | 500, 501, 610, 929 |
Shogun | 617 |
Signature | 611 |
Simpson | 803 |
Sony | 605 |
Soundesign | 607, 615, 901 |
Squareview | 201 |
SSS | 617, 901 |
Starlite | 901 |
Supreme | 605 |
Sylvaina | 201, 301, 601, 901 |
Symphonic | 201, 901 |
Tandy | 500 |
Tatung | 802 |
Technics | 004, 202 |
Techwood | 202, 619 |
Teknika | 104, 301, 605, 611, 615, 617, 619, 900, 901 |
TMK | 602, 607, 619 |
Toshiba | 609, 613, 620, 903 |
Trutech | 101 |
Victor | 701 |
Vidtech | 607, 617 |
Vizio | 927 |
Wards | 301, 601, 607, 608, 610, 611, 615, 617, 619 |
Westinghouse | 926, 928 |
White Westinghouse | 101, 605, 614 |
Yamaha | 601, 617 |
Zenith | 611, 614, 619, 700, 900 |
1. How to Program Pavy Universal Remote Without Codes
All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below.
- Turn on the smart device you want to use the universal remote to control, such as the TV.
- To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
- Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
- Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
- To save the code, press the “device” button now. The device’s LED will flash twice to confirm the code that was entered.
2. How to Program Pavy Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- You must first “Turn The Device On.”
- On your “Pavy universal remote,” select “TV.”
- To put the universal remote in “Learning Mode,” press and hold the “Setup button” until it flashes a light.
- Finally, key in the “Keycode” you gathered from the programming handbook (Instructions Booklet)
- Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
- When the screen goes dark, you can release the “Power Button.”
That’s All! Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the data table.
3. How to Program Pavy Universal Remote With Code Search
You can set your universal remote to search mode and look for the correct key code if you are unable to find it at that time. The remote control is put into search mode by a code in the handbook.
- “Turn The Device On” first.
- Hold down the “Setup” button for a while.
- Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”
Getting your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps.
Conclusion
An extensive list of codes for your universal remote has been provided. Additionally, we have walked you through each step of the various ways to configure your universal remote.
We sincerely hope that the universal remote codes and programming methods were successful for you.
Use the search function in the top bar to locate any other devices you may have. As an alternative, you can visit our site and go through the brands or categories to find them.