Panasonic Universal Remote Codes & Program Instructions

You intend to use a universal remote to operate your Panasonic. In that scenario, you must configure your preferred universal remote control with one of the following codes.

Using any one of the three ways listed below, you may easily program your universal remote control. You can also use the method listed below to program without using any coding.

Try a different code if the first one doesn’t seem to work. We add new codes to our listings on a regular basis.

Contents

Panasonic Universal Remote Codes

  • 1231
  • 1289
  • 1049
  • 1053
  • 1292
  • 1295
  • 1010
  • 1123
  • 1003
  • 1152
  • 1096

Panasonic HDTV Universal Remote Codes

1169, 1410, 1140, 1336, 1170, 1234, 1331, 1442, 1417, 1233, 1194

Panasonic DVD Universal Remote Codes

2031, 2066, 2075, 2076, 2104, 2105, 2106, 2111, 2151, 2153, 2154

Panasonic Audio Universal Remote Codes

4030, 4063, 4050, 4018, 4038, 4050, 4051, 4005

RCA Universal Remote Codes For Panasonic

1277, 1275, 1406, 1055, 1418, 1253, 1109, 1392, 1130, 1003, 1054, 1289, 1246, 1419, 1170, 1389, 1286, 1350, 1062

GE & One-For-All Universal Remote Codes For Panasonic

0437, 0054, 0170, 0950, 0003, 0070, 0171, 0062, 0381, 0148, 0374

Philips Universal Remote Codes For Panasonic

0039, 0696, 0416, 0618, 0739, 0901, 0608, 0345, 0007, 0807, 0718

Magnavox Universal Remote Codes For Panasonic

  • 0029
  • 0052
  • 0064

1. How to Program Panasonic Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to identify the correct remote code that works with your remote. Follow the instructions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to confirm the code that was entered.

2. How to Program Panasonic Universal Remote With Manual Method

Your universal remote may be easily configured using the keycode, which also serves to identify the make and model of your device.
  1. You must first “Turn The Device On.”
  2. On your “Panasonic universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you got from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All.

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the data table.

3. How to Program Panasonic Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the manual.
  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a minute.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this instance your TV, “Turns Off.”
The above procedure may take more time, but it is critical to find your key code. After you’ve completed the above steps, your remote should be functional for all in-room functions.

Conclusion

We have listed almost all Universal Remote Codes for Panasonic in this article. However, if you see any issues with the above universal remote codes or if we have missed certain codes then please leave a comment.
We will correct the errors if we get more tested codes or updates.

Leave a Comment