Panasonic Blu-Ray Universal Remote Codes & Program Instructions

The Panasonic Blu-ray universal remote control codes for the 4 and 5-digit models are listed below. If 4 digits are required, you can use them or three-digit codes as well. So before you start, learn what type of code your universal remote control requires and then try the codes.

You can also test each of the codes listed in the lines below one at a time until your Panasonic Blu-ray player is set up with the remote. Otherwise, you can quickly search for the code manually by utilizing the programming methods listed below.

So, let’s begin.

Contents

Panasonic Blu-Ray 5 Digit Universal Remote Codes

  • 20490
  • 20703
  • 21490
  • 20632
  • 20503
  • 21641
  • 21579
  • 21762

Panasonic Blu-Ray 4 Digit Universal Remote Codes

  • 0820
  • 0862
  • 0716
  • 0733
  • 0740

These codes are compatible with all Panasonic Blu-Ray players, including Smart Network WI-FI ready versions and Panasonic 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players.

1. How to Program Panasonic Blu-Ray Universal Remote Without Codes

All universal remote codes are scanned in the remote during the auto search method. It scans one code at a time to find the correct remote code that works with your remote to configure the control. Follow the instructions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to confirm the code that was entered.

2. How to Program Panasonic Blu-Ray Universal Remote With Manual Method

The universal remote may be easily configured using the keycode, which also serves to verify the make and model of your device.
  1. You must first “Turn The Device On.”
  2. On your “Panasonic Blu-ray universal remote,” select “TV.”
  3. In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Lastly, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the data table.

3. How to Program Panasonic Blu-Ray Universal Remote With Code Search

If you can’t locate the correct key code for the device at the time, you can configure your universal remote to search for it. It’s a manual code that puts your remote in search mode.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a while.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this instance your TV, “Turns Off.”

Getting your key code may take a little more time using the above method, but it is very essential. Your remote should function properly for all in-room functions once you have completed these steps.

We hope you’ve successfully configured your Panasonic Blu-ray player using the above methods and codes.

Final Words

If you’ve found this article helpful please leave us a comment here in the comment section. It will help us to improve our website and reach more visitors who are waiting for their remote codes.

As a helpful activity, we also accept new universal remote control codes that are working for you. Please leave those codes in the below comment section and we will show them to other users by posting them on our site.

Leave a Comment