Onkyo Receiver Universal Remote Codes & Program Instructions

by

You wish to use a universal remote to control your Onkyo receiver. In that situation, you must configure your preferred universal remote control with one of the following codes.

Following is the code lists are step-by-step instructions for programming your universal remote using the provided codes as well as two backup methods in case the first method did not work.

Try a different code if the first one doesn’t seem to work. We add new codes to our listings on a regular basis.

Contents

Onkyo Receiver Tuner Universal Remote Codes

  • 5002
  • 5076
  • 5079
  • 5075
  • 5073
  • 5018
  • 5074
  • 5080
  • 5077
  • 5081
  • 5078

Onkyo Amplifier Universal Remote Codes

6017, 6054, 6056, 6005, 6006

Onkyo Audio Universal Remote Codes

4004, 4016, 4017

Onkyo DVD Universal Remote Codes

2220, 2318, 2410, 2006, 2219

GE Universal Remote Codes For Onkyo Receiver

0975

How to Program a Universal Remote to Work with Your Onkyo Receiver?

You can configure a universal remote to work with your Onkyo Receiver in one of three ways. We will now walk you through each of them step-by-step.

1. How to Program Onkyo Universal Remote Without Codes

  1. All universal remote control codes are scanned in the remote during the auto search method. To configure your remote control, it scans one code at a time to determine the correct remote code that works with your remote. The directions below must be followed.
  2. Turn on the smart device you want to control with your remote.
  3. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  4. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  5. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  6. To save the code, press the “device” button now. The device’s LED will flash twice to authenticate the code that was entered.

2. How to Program Onkyo Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “Onkyo universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you got from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

3. How to Program Onkyo Universal Remote With Code Search

If you can’t locate the correct key code for the device at the time, you can configure your universal remote to look for it. It’s a manual code that puts the remote in search mode. You can also search for it in your manual/booklet.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a while.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this instance your TV, “Turns Off.”

Getting your key code may take a little more time using the above method, but it is very necessary. Your remote should function properly for all in-room functions once you have completed these steps.

Final Words

We’ve included a comprehensive list of codes for your universal remote. I’ve also walked you through the various methods for configuring your universal remote.

We hope the universal remote codes and programming methods were helpful.
If you have another device, you can search for it in the top bar. Alternatively, you may go to our site and search for them by category or brand.

We appreciate the opportunity to assist you.

Leave a Comment