Ocosmo Universal Remote Codes & Program Instructions

by

If you want to pair your Ocosmo TV with your favorite universal remote control, enter the 3, 4 or 5-digit codes, we’ve listed below. Your TV will then be paired to your universal remote after this.

You can try using one of the below-mentioned codes to link your TV to your chosen universal remote. If it doesn’t work, try another one from the list below, and ultimately your remote will be configured.

Contents

Ocosmo Universal Remote 5 Digit Codes

  • 13899
  • 10810
  • 10878
  • 11599
  • 10000
  • 11360
  • 10889

How To Program Ocosmo TV Universal Remote?

We are going to discuss 3 working methods here for your inconvenience. So if the first and 2nd method doesn’t work then you can go with the 3rd one.

1. How to Program Ocosmo Universal Remote Without Codes

All universal remote codes are scanned in the remote when using the auto search method. To configure the control, it scans one code at a time to locate the correct remote code that works with your remote. Follow the instructions outlined below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Repeatedly press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should fire up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to confirm the code that was entered.

2. How to Program Ocosmo Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “Ocosmo universal remote,” select “TV.”
  3. So, to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All !!

Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

3. How to Program Ocosmo Universal Remote With Code Search

If you can’t locate the correct key code for the device at the time, you can configure your universal remote to look for it. It’s a manual code that puts the remote in search mode.

  1. The Ocosmo TV you want to control must first be turned ON. (Note: Throughout the process, the remote control must be pointed at the device.)
  2. Hold down the CODE SEARCH button on the universal remote for a few seconds. Release the CODE SEARCH button once the indicator light turns on.
  3. The device button for the type of device you want the universal remote control to control should then be pressed and released.
  4. Now, an indicator light need to blink once and then stay illuminated.
  5. Press the POWER ON-OFF button while pointing the remote control at the Ocosmo TV.
  6. Once the Ocosmo TV has shut down, you must press and release the ENTER button.
  7. If you do not press the ENTER button within three seconds, the remote control will send the next code in the list, and you will be required to start over from Step 2.

Locating your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps.

The three ways mentioned above make it simple to configure the universal remote control for our Ocosmo TV.

Final Words

Regardless of brand, our website will be helpful for all universal remote controls. All you have to do is keep checking the codes until your device is set up with your chosen universal remote control.

Simply leave a remark if you have any questions concerning the codes, and your problems will be fixed as quickly as possible. We appreciate you visiting our website.

Leave a Comment