You’ve got Magnavox Blu-ray Player and looking for universal remote control codes over the internet? If Yes, then you’ve come to the right place. In this blog, we’re providing all types of Magnavox Blu-ray Universal Remote Codes. You only need to use your remote control to try the codes.
Try another code if the first one does not appear to be working. With new codes, we are constantly updating our lists.
Contents
- 0731
- 0666
- 0675
- 0800
- 20675
- 21354
- 21506
- 20646
- 20539
- 21472
- 20503
- 21177
- 22229
All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the instructions below.
- Turn on the smart device you want to use the universal remote to control, such as the TV.
- To “Turn On” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
- Use the remote to select the “CH+” and “CH-” buttons. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
- Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
- To save the code, press the “device” button now. The device’s LED will flash twice to validate the code that was entered.
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- You must first “Turn The Device On.”
- On your “Magnavox Blu-Ray universal remote,” choose “TV.”
- To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
- Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
- Just “point your remote at the TV” after performing this step, and then “Press and Hold The Power” button.
- When the screen goes dark, you can release the “Power Button.”
That’s All!!
Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the data table.
You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the manual.
- “Turn The Device On” first.
- Hold down the “Setup” button for a while.
- Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this scenario your TV, “Turns Off.”
If you followed the steps correctly, your Magnavox Blu-ray Player should already be compatible with the universal remote. The code retrieval feature can be used to detect the code for your device when you discover a working code using the method provided.
Conclusion
We appreciate your feedback, which will help us improve our blog and help more people who are waiting for their remote codes. We also accept new universal remote control codes that have worked for you.
Please leave those codes in the comment section below and we will share them with other users by posting them on our website.