Logik Soundbar Universal Remote Codes

Do you know there are multiple methods of configurations for home entertainment systems with your Logik Soundbar universal remote? Yes, a universal remote like this one is reliable enough to handle several devices.

You can enjoy a different upgrade in your home entertainment system by following a simple approach on how to configure a Logik remote for your Soundbar.

To experience the smooth operation of this remote, start the setup process by finding the list of Logik remote codes here.


Logik Soundbar Universal Remote Codes List

The list of codes for the Logik Soundbar remote can be found here. These codes are required to configure the chosen device. You must be careful to enter the exact code provided here because Logik soundbar remote codes are case-sensitive.

You must choose the right code from the list for the device type you intend to configure. The full list of Logik Soundbar universal remote codes is given here.

  • 0596
  • 0016
  • 2135
  • 0060
  • 2107
  • 1107
  • 0011
  • 1065
  • 0908
  • 1245
  • 0726
  • 0399
  • 0039

Logik Soundbar Universal Remote 3 Digit Codes

  • 016
  • 072

How to Program Logik Soundbar Universal Remote Codes

There are three simple ways to set up or configure a universal remote to work with your Logik Soundbar. Now we are going to guide you step by step on each one of them.

1. How to Program Logik Soundbar Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to locate the correct remote code that works with your remote. Follow the instructions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Repeatedly press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to validate the code that was entered.

2. How to Program Logik Soundbar Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your Logik Soundbar universal remote, select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it displays a light.
  4. Lastly, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the data table.

3. How to Program Logik Soundbar Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are not able to find it at that time. The remote control is forced into search mode by a code in the manual.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue holding down the “Power Button” on the remote control until the device, in this case, your SoundBar, “Turns Off.”

If you followed the steps correctly, your Logik Soundbar should be working with the universal remote immediately. The code retrieval feature can be used to locate the code for your device when you discover a functional code using the method described.

Final Words

Have you successfully matched the code with your device and started the process? Share your feedback with us by letting us know what code you used and which device it corresponded to.

Other readers may find your expertise quite helpful for everyone. Please contact us or leave a comment below and share your thoughts.

Leave a Comment