LG Soundbar Universal Remote Codes & Program Instructions

You just need to have the working codes that we’ve listed below if you want to control your LG Soundbar with a universal remote, cable remote, or satellite remote.

It is simple to use your LG Soundbar with the remote control if you have a working installation guide and working LG Soundbar Universal Remote Codes.

Analyze the codes we listed below. By entering the 4 and 5-digit remote codes listed below, you may easily configure the LG soundbar and your favorite remote control.

LG Soundbar 4 Digit Universal Remote Control Codes

• 1293
• 4041
• 4025

LG Soundbar 5 Digit Universal Remote Control Codes

• 32676
• 31953
• 31293
• 11993

GE Universal Remote Codes For LG Sound Bar

• 0972

Cox Remote Codes For LG Sound Bar

• 3217

How To Program LG Soundbar Universal Remote?

USING DIRECTV AND REMOTE CODES DO NOT WORK? Just perform a code search by using the volume—with the soundbar on—volume up—but be muted—

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the “9-9-1” (three-digit) code
• Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

Keep on pressing and releasing the Channel up button by pointing your remote control at the soundbar. Once you observed that the volume has been changed then you need to click on Select then it will lock the code

(If the DirecTV remote does not turn the soundbar ON or OFF, use the middle PWR key in the AV1 or AV2 device as this will control a Soundbar.)

Now we’re going to mention some more methods to fix some issues. So check them once.

All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to locate the correct remote code that works with your remote. Follow the instructions below.

1. Turn on the smart device you want to use the universal remote to control, such as the TV.
2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is prepared to configure, according to the LED light.
3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
5. To save the code, press the “device” button now. The device’s LED will flash twice to validate the code that was entered.

How to Program LG Soundbar Universal Remote With Manual Method

1. You must first “Turn The Device On.”
2. On your LG Soundbar universal remote, select “TV.”
3. In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
6. When the screen goes dark, you can release the “Power Button.”

That is ALL!!

Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

Final Words

Finding your key code may take a little more time using the above method, but it is very crucial. Your remote should function properly for all in-room functions once you have completed the aforementioned steps.

The methods and codes mentioned above should work to setup your LG Soundbar as well as your preferred remote control. For LG Soundbar remote control setup, those techniques are employed.