LeEco TVs Universal Remote Codes & Program Instructions

For your universal remote, we have provided a comprehensive set of LeEco TVs Universal Remote Codes. Additionally, we have walked you through all of the different ways to configure your universal remote, step by step.

We wish you success with the universal remote codes and programming methods.

Use the top bar’s search function to locate any more devices you may have. As an alternative, you can visit our homepage and search the categories or brands to locate them.

Contents

LeEco TVs Universal Remote Codes List

  • 4007
  • 4137
  • 14007

1. How to Program LeEco TV Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to locate the correct remote code that works with your remote. The instructions below must be implemented.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “Turn On” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

2. How to Program LeEco TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “LeEco TV universal remote,” select “TV.”
  3. To put your universal remote in “Learning Mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Then “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

3. How to Program LeEco TV Universal Remote With Code Search

Let’s say you were unable to locate a valid code for your LeEco TV. In that situation, you might attempt another method to correctly configure your universal remote. To find the right code, that method makes use of the universal remote search feature.

  1. LeEco TV you want to control must first be turned ON.
  2. Tap and hold the CODE SEARCH button on the universal remote for a few seconds. Release the CODE SEARCH button once the indicator light turns on.
  3. The device button for the sort of device you want the universal remote control to control should then be pressed and released.
  4. Now, an indicator light would need to blink once and then stay bright.
  5. Press the POWER ON-OFF button while pointing the remote control at the LeEco TV.
  6. You must push and release the ENTER button as soon as the LeEco TV turns off.
  7. If you do not press the ENTER button within three seconds, the remote control will send the next code in the list, and you will be required to start over from Step 2.

If you followed the steps correctly, your LeEco TV should already be receptive to the universal remote. The code retrieval feature can be used to retrieve the code for your device when you locate a functional code using the method provided.

Final Words

A wide list of codes for your universal remote has been provided. Additionally, we have walked you through every step of the various ways to configure your universal remote.

We sincerely hope that the universal remote codes and configuration methods were successful for you.
We also accept brand-new universal remote control codes that are successful for you.

If you would like to share them, please do so in the comment box below and we will post them on our website for the convenience of many other users.

Leave a Comment