JVC TV’s Universal Remote Codes & Program Instructions

If you don’t have the three, four, or even Five-digit JVC universal remote codes, you’re stuck using any brand of universal remote control. If you want to pair your favorite universal remote with your JVC TV then you’ll need JVC TV’s Universal Remote Codes which are listed below.

You should use the codes to configure your universal remote with the JVC TV. You can check the codes below and the instructions for doing so. Whether you’re using a Sky, Dish, or Philips universal remote, the codes listed below will be of great use to you.

  • 0060
  • 0026
  • 0197
  • 0069
  • 0242
  • 0923
  • 0012
  • 0065
  • 0067
  • 0141

NOTE: Try these codes first as we are being reported by many users that they tried these codes and their remote worked within first attempt.


JVC TV’s Universal Remote 4 Digit Codes

1227, 1130, 1131, 1080, 1092, 1117, 1131, 1235, 1288, 1299, 1011, 1012, 1026, 1049, 1052, 1054, 1055

JVC TV’s Universal Remote 3 Digit Codes

065, 067, 089, 013, 054, 055, 060

JVC TV’s Universal Remote 5 Digit Codes

12049, 11670, 11349, 12463, 11245, 107311, 10169, 17706, 11892, 12859, 13829, 10053, 12561, 10683, 14808, 12265, 10463, 19405, 14273, 18016, 12811, 13650, 10650, 10053, 10069, 10160, 1193, 11774

RCA Universal Remote Codes For JVC TV

1159, 1063, 1054, 1285, 1269, 1157, 1055, 1065, 1239, 1013, 1123, 1430, 1066,1067, 1393, 1158, 1060, 1012, 1396, 1182

GE Universal Remote Codes For JVC TV

0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069

One For All Remote Codes JVC TV

0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069

Philips Universal Remote Codes For JVC TV

0715, 0108, 0802, 0204, 0508, 0607, 0308, 0993, 0326, 0321

Magnavox Universal Remote Codes For JVC TV

  • 0038
  • 0053

How Do You Program a Universal Remote to A JVC TV?

There are three easy ways to configure your universal remote with your JVC TV so don’t wait, just follow the instructions below.

How to Program JVC TV Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search method. To configure the control, it scans one code at a time to locate the correct remote code that works with your remote. The instructions below must be followed.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program JVC TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “JVC TV universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!! Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

How to Program JVC TV Universal Remote With Code Search

  1. To proceed, switch on the JVC TV you want to operate.
  2. Press and hold the CODE SEARCH button on the universal remote. Release the CODE SEARCH button when the indicator light flashes.
  3. Then, push and release the device button associated with the type of device you want the universal remote control to control.
  4. We should now notice an indicator light blink once and then stay lighted.
  5. Point the remote at the JVC tv and press and release the POWER ON/OFF button.
  6. You must immediately press and release the ENTER button after the JVC TV has turned off.
  7. If you do not press the ENTER button within three seconds, the remote control will send the next code in the list, and you will be required to start over from Step 2.

If you followed and implemented the above steps correctly, your JVC TV should now function with your universal remote. When you find a working code using the provided manner, you can use the code retrieval feature to identify the code for your device going forward.

Alternate Method To Setup JVC TV Remote

  1. Turn on your TV manually or with the TV remote.
  2. Press and hold the MUTE and SELECT buttons simultaneously until the green light flashes two times.
  3. To enter the initial digit, press the number keys twice and wait for the green light on top to blink twice.
  4. After that, enter the other digits.
  5. Point your remote at the TV and push the OFF button. Your TV should now be switched off.
  6. If your TV does not switch off, continue the method until it responds to this universal remote control.

We’ve provided a list of every brand that can be used to run this TV in the section below. Your TV remote code will be set once you have checked each code individually.

Wrapping Up

I have provided you with a wide list of codes for your universal remote. Moreover, we have walked you through each step of the various ways to configure your universal remote. We sincerely hope that the universal remote codes and programming methods were successful for you.

Use the search function in the top bar to locate any other devices you may have. Alternatively, you can visit our site and go through the brands or categories to find them.

Leave a Comment