ILO TV’s Universal Remote Codes & Program Instructions

If you’re looking for different remote control codes to configure this TV, look at the list below. You’ll find 3-digit, 4-digit, and 5-digit codes there. We’ve listed all universal remote control codes that are highly recommended. Check them out right away to learn the ILO TV remote codes.

You can try another code if the one listed below isn’t working; you’ll just need to keep doing this until your ILO TV is linked.


ILO TV’s Universal Remote 4 Digit Codes List

0171, 0179, 0180, 0463, 1000, 1004, 1030, 1035, 1054, 1090, 11071133, 1168, 1169, 1206, 1230, 1286

ILO TV’s Universal Remote 5 Digit Codes list

11286, 11603, 11684, 11990, 10463, 10171

RCA Universal Remote Codes For ILO TV

074, 1394, 059, 069, 1665, 1133, 1218, 1286, 1054, 1684, 1168, 1990, 073, 1603, 11990, 070, 1230, 1206, 11394, 11684, 1169, 1219, 085, 0171, 060, 11665, 1231

ILO TV’s Universal Codes For Directv Remote

11394, 11603, 13149, 11665, 11990, 11286, 11684, 11463

GE & One-For-All Universal Remote Codes For ILO TV

0198, 1070, 1024, 1023

Philips Universal Remote Codes For ILO TV

0421, 1608, 1004, 1903

How To Program ILO TV Universal Remote?

We have 3 different ways to use any universal remote by connecting it with your TV, but for ILO TV there is only one official way to program, which is described here. Try that approach out first, and if it doesn’t work, try the other methods.

Official Method

  1. Turn your “ILO TV” on
  2. Now “TV” and “SEL” buttons should “Hold On” simultaneously for 3 seconds, after three seconds the button will be light.
  3. Point your remote with the button lit and then “Enter TV’s Code (3 or 4 or 5 digits)”
  4. Now check the remote by pressing the “Volume +” button and it should be “Turn on the TV Volume Up”
  5. Finally, click on the “TV Button” and the button should blink twice, it means the remote has been stored 3, 4, or 5-digit code.

How to Program ILO TV Universal Remote With Auto Search

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “Turn On” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program ILO TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “ILO TV universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Lastly, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!! Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

How to Program ILO TV Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the handbook.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this scenario, your TV, “Turns Off.”


Getting your key code may take a little more time using the above method, but it is very essential. Your remote should function properly for all in-room functions once you have completed these steps.

We hope the procedures and codes listed above have been used to configure your ILO TV as well as your preferred remote control. For setting up ILO remote controls, those methods are used.

If you found this article to be useful, we would appreciate it if you would share it with your family and leave a comment about the blog post. Moreover, we welcome any and all recommendations on universal remote codes. If you know of any codes, please share them in the box below.

Leave a Comment