Huayu Universal Remote Codes & Program Instructions

We have explained 3 ways to set up a Huayu universal remote on your favorite device so choose the one that works best for it. We advise using this Huayu universal remote because it is among the best pick on the market. You can view the Huayu universal remote control codes from the list below.

We personally verified them in each device before only providing functional Huayu universal remote codes below. Choose a code, then code it using the method elaborated below.


Huayu Universal Remote Codes List

  • 011
  • 017
  • 029
  • 032
  • 034
  • 054
  • 067
  • 069
  • 071
  • 075
  • 076
  • 077
  • 078
  • 079
  • 080
  • 081
  • 107
  • 113
  • 117

Try these codes also

  • 0028
  • 0026
  • 0022
Brand NameRemote Codes for TCL Roku TVs
Panasonic032, 146, 155, 173, 178, 180
TCL142, 321
Ace TV261, 278, 305
Hisense078, 209, 284, 345
Samsung006, 030, 020, 068
Sharp TV007, 040, 102

Huayu Universal AC Remote Codes

Huayu ac universal remote codes are not currently available, thus you must use the auto search method to set up your Huayu universal remote for AC. Use the automated code search procedure below. Contact Huayu’s customer service department at 086-550-7816508 for more confirmation.

Huayu Universal Remote Code For Panasonic

032, 146, 155, 173, 178, 180

Huayu Universal Remote Code For Skyworth


Huayu Universal Remote Code For TCL

142, 321

Huayu Universal Remote Code For Ace TV

261, 278, 305

Huayu Universal Remote Code For hisense


Huayu Universal Remote Code For Samsung

006, 030, 020, 068

Huayu Universal Remote Code For Sharp TV

007, 040, 102

How to Program Huayu Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to program, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Constantly press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Huayu Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “Huayu universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you got from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

How to Program Huayu Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is driven into search mode by a code in the instructions.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a while.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Final Words

Getting your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps. Using the above universal remote codes, you can now control your device with the Huayu universal remote.

If you have any questions regarding the remote codes, such as the three-digit or four-digit ones, please post them in the comment box below.

Leave a Comment