Huayu DVD Universal Remote Codes

by

Various universal codes are offered on multiple websites. But if you really want your universal remote’s correct functioning codes then a correct list of Huayu DVD universal remote control codes is provided below, making it simple for you to use them. Make sure you change your standard remote control to the Huayu DVD universal remote.

Only then may universal codes be used; otherwise, you must create a number of complexities.

Contents

Huayu DVD Universal Remote Codes List

  • 0028
  • 0026
  • 0022

How to Program Huayu Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to locate the correct remote code that works with your remote. Follow the directions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Huayu Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “Huayu universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

How to Program Huayu Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote is compelled into search mode by a code in the handbook.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Wrapping Up

Locating your key code may take a little more time using the above method, but it is very essential. Your remote should function properly for all in-room functions once you have completed these steps.

These points should help you understand how useful a universal remote is to you. Let’s try applying the codes with the help of the remote control without worrying about it. Should you have any questions, shoot it to me immediately and I would try my best to resolve it.

Leave a Comment