Honeywell TV Universal Remote Codes & Program Instructions

Everyone enjoys relaxation by watching television or listening to music, especially at the end of a long and extremely busy day. Try controlling many devices in your room with a single remote to make relaxing extra comfy. You just need codes to configure each preferred device if the Honeywell TV remote is easier to use.

To set up the device and make it compatible with your remote, use the Honeywell TV universal remote codes.

Contents

Honeywell TV Universal Remote Codes List

The unique code for the manufacturer and model of your device is one of the keys to effectively configuring the Honeywell TV universal remote. Find the Honeywell TV code that best matches your desired device from our comprehensive list.

Honeywell TV Universal Remote Codes List

  • 11758
  • 0028
  • 0027
  • 0021
  • 0000

GE & Philips and One-For-All Universal Remote Codes For Honeywell TV

  • 6141

How To Program Honeywell TV Universal Remote

The Honeywell TV remote’s programming procedure is pretty simple. Simply take the steps one at a time and adhere to the directions. Just remember the specific Honeywell TV codes you will require during the process.

You can completely take advantage of using the Honeywell TV remote to control other devices once the setup is complete. The steps you must take are listed below.

How to Program Honeywell TV Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “Turn On” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Honeywell TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. To start, you must “Turn The Device On.”
  2. On your “Honeywell TV universal remote,” press the “TV” button.
  3. Once it displays the “Light Flash” (which indicates it is in “Learning mode”), push and hold the “Setup button” of your remote.
  4. Finally, enter the “Keycode” you noted down from the programming manual (Instructions Booklet)
  5. After completing these steps, simply “aim your remote at the TV” and “Press And Hold The Power” button.
  6. Whenever the screen turns off, you can let go of the “Power Button.”

That’s All!!!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

How to Program Honeywell TV Universal Remote With Code Search

If you can’t locate the correct key code for the device at the time, you can configure your universal remote to look for it. It’s a human code in your handbook that puts your remote in search mode.

  1. To begin with, “Turn The Device On.”
  2. Press and hold the “Setup” button right now.
  3. Enter the three-digit code “9-9-1” while holding down the “Power Button” on the remote. Then, press the Channel up button until the device, in this case your TV, “Turns Off.”

Wrapping Up

Getting your key code may take a little more time using the above method, but it is very necessary. Your remote should function properly for all in-room functions once you have completed these steps.

Have the above-mentioned codes we provided you helped you configure your Honeywell TV remote? Please tell us about your interaction with us. Please post a comment in the space provided below.

Leave a Comment