Hisense TV’s Universal Remote Codes & Program Instructions

Use the universal remote to control your Hisense TV and the codes are listed in the list below. There are 3, 4, and other codes available. To configure your device with the universal remote control, try each code from the list below one by one.

The list of universal remote codes for Hisense TVs will be mentioned first, followed by three methods that are suggested for configuring your Hisense TV with the universal remote.

Worked Code for Many people: 0178


Hisense TV 3 Digit Universal Remote Codes

  • 759

Hisense TV 4-Digit Universal Remote Codes

0073, 0182, 0216, 0848, 0208, 0009, 0145, 0156, 0227, 0508, 0696, 0748, 0753, 0821, 1170, 0780.

Hisense TV 5-digit Universal Remote Codes

  • 12183
  • 10748
  • 11758
Brand NameHisense TV Remote Codes
GE ( General Electric)0073, 0182, 0216
One-For-All0182, 0073, 0216
Philips0908, 0819, 0223
Westinghouse3537, 1173, 2464, 1016, 1176, 0004, 0216, 0182, 2463, 2060, 0077, 0073, 2503

RCA Universal Remote Codes For Hisense TV

  • 1237

GE Universal Remote Codes For Hisense TV

  • 0073
  • 0182
  • 0216

One-For-All Universal Remote Codes For Hisense TV

  • 0073
  • 0182
  • 0216

Philips Universal Remote Codes For Hisense TV

  • 0908
  • 0819
  • 0223

Westinghouse Universal Remote Codes For Hisense TV

3537, 1173, 2464, 1016, 1176, 0004, 0216, 0182, 2463, 2060, 0077, 0073, 2503

if none of the above codes worked from the above list then call this number 1-888-935-8880 to have your working code.

How to Program Hisense TV Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below.

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To save the code, press the “device” button now. The device’s LED will flash twice to confirm the code that was stored.

How to Program Hisense TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “HiSense TV universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!!!

Your TV should now function fine with the universal remote control. If it doesn’t, try repeating the operation with a different code from the same section of the reference table.

How to Program Hisense TV Universal Remote With Code Search

You can set your universal remote to search mode and look for the right code if you are unable to find it at that time. The remote control is forced into the search mode by a code in the instructions.

  1. To begin with, “Turn The Device On.”
  2. Press and hold the “Setup” button right now.
  3. Enter the three-digit code “9-9-1” while holding down the “Power Button” on the remote. Then, press the Channel up button until the device, in this case, your scenario, “Turns Off”.

Wrapping Up

Getting your key code may take a little more time using the above method, but it is very necessary. Your remote should function properly for all in-room functions once you have completed these steps. We may easily configure our Hisense device universal remote using the three methods mentioned above.

We truly hope that this post was helpful to you and that you were able to find the right universal remote code for your Hisense TV. With this remote control, you can now watch all of your favourite TV shows and other programs.

Leave a Comment