Because cracking the universal remote’s key code is quite difficult. However, it is now simple, so there is no need to look up further information regarding remote codes. Once you have located the necessary key codes, you must follow the steps to apply the right code.
The best feature of the remote is that it can operate all devices simultaneously. If you’re seeking for ge universal remote tv codes, then go no further. There is no requirement to buy a distinct remote for each device. For all of the devices, only use one remote.
Contents
GE SAT/DTV/WebTV Universal Remote Codes List
| Brand Name | Codes |
|---|---|
| AMPLICA | 0575 |
| BELL EXPRESSVU | 0654, 0647, 0655, 0628 |
| CHANNEL MASTER | 0577, 0578, 0579 |
| CHAPPARAL | 0560, 0561 |
| CHEYENNE | 0561 |
| DRAKE | 0562, 0574, 0587 |
| DREAMBOX | 0620 |
| DIRECTV | 0622, 0632, 0629, 0621, 0623, 0576, 0586, 0616, 0613, 0630, 0634, 0636, 0638, 0641, 0652, 0653, 0657, 0659, 0607, 0619, 0641 |
| DISH NETWORK | 0655, 0647, 0628, 0612, 0654, 0588, 0589, 0590 |
| DISHPRO | 0588, 0589, 0590, 0654 |
| DX ANTENNA | 0568, 0582 |
| ECHOSPHERE | 0628 |
| ECHOSTAR | 0655, 0647, 0628, 0612, 0654, 0588, 0589, 0590 |
| EXPRESSVU | 0654, 0647, 0655, 0628 |
| FORTEC STAR | 0569, 0555, 0556, 0557, 0558, 0559 |
| FUJITSU | 0591, 0592 |
| GE | 0636, 0649, 0637, 0622, 0653, 0650, 0651, 0652 |
| GEMINI | 0595 |
| GENERAL INSTRUMENT (GI) | 0648, 0640, 0645, 0564, 0565, 0566, 0593, 0627, 0642, 0643, 0644 |
| GLOBECAST | 0554 |
| GO VIDEO | 0610 |
| HITACHI | 0638, 0629, 0630, 0632, 0641, 0607 |
| HUGHES NETWORK | 0632, 0638, 0629, 0630, 0641, 0621, 0607, 0580 |
| JVC | 0628, 0612 |
| KENWOOD | 0598 |
| LUXOR | 0599 |
| MAGNAVOX | 0576, 0612, 0639 |
| MACOM | 0600 |
| MITSUBISHI | 0641, 0632, 0638, 0629, 0630, 0607 |
| MOTOROLA | 0648, 0618 |
| NORSTAT | 0601 |
| PACE | 0614, 0615, 0646 |
| PANSAT | 0584, 1048 |
| PANASONIC | 0626, 0586, 0596 |
| PRIMESTAR | 0627, 0640 |
| PHILIPS | 0576, 0612, 0621, 0629, 0630, 0632, 0638, 0641, 0639, 0607 |
| PHILIPS-MAGNAVOX | 0576, 0612, 0639 |
| PIONEER | 0604 |
| PROSAT | 0563 |
| PROSCAN | 0636, 0637, 0650, 0653, 0651, 0652 |
| RCA | 0636, 0649, 0637, 0622, 0658, 0653, 0650, 0651, 0652, 0098 |
| REALISTIC | 0567, 0603 |
| SAMSUNG | 0594, 0583, 0613, 0616, 0619 |
| SHARP | 0604 |
| SKY NETWORK | 0614, 0615, 0646 |
| SIERRA I II III | 0561 |
| SONY | 0623, 0657, 0659, 0585, 0602 |
| STARCHOICE | 0640, 0645, 0627 |
| STAR SIGHT | 0633 |
| STAR TRAK | 0608 |
| STS | 0568, 0570, 0571 |
| SUPER GUIDE | 0609 |
| SYLVANIA | 0581 |
| TOSHIBA | 0641, 0632, 0638, 0629, 0630, 0607, 0572, 0624, 0625, 0631 |
| ULTIMATE TV | 0653, 0659 |
| UNIDEN | 0633, 0573, 0611 |
| UNITED | 0597 |
| VIDEO CIPHER II | 0574 |
| WEB TV | 0612, 0585 |
| ZENITH | 0617, 0634, 0656, 0595, 0646, 0562, 0574, 0587, 0635 |
How to Program GE Universal Remote Without Codes
All universal remote control codes are processed by the remote’s scanning procedure in the auto search method. To program the control, it examines each code individually to determine which is the right one to use with your remote. The steps listed below should be followed:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to store/save the code. LED of your device will blink twice for confirming the code stored.
How to Program GE Universal Remote With Manual Method
The keycode allows us to quickly program a universal remote control and it also helps us to identify the make and model of your equipment.
- First, you need to “Turn The Device On”
- Press the “TV” on your “GE universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off.
That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.
How to Program GE Universal Remote With Code Search
You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.
- “Turn The Device On”, first.
- Hold down the “Setup” button for a moment.
- Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”
Wrapping Up
It may take a little longer to find your key code using the above method, but it is very crucial. After completing the aforementioned steps, your remote should function properly for all in-room functions.
Well, now that you’ve read this article, you can use the universal remote control more effectively. So long as you utilize these universal remote codes, you can watch your favourite shows without worrying about technical difficulties.