The codes for controlling various gadgets with your remote are known as universal remote controls. There is no need to panic if you wish to operate your GE HDTV Set Top Boxes. Because all you need to do to control your GE HDTV Set Top Boxes is program your universal remote.
Therefore, for your convenience, the list of codes is provided below along with straightforward instructions for entering them. If you’re looking for TV codes for the Ge Universal Remote, then see this site.
Contents
GE HDTV Set Top Boxes Universal Remote Codes List
| Brand Name | Codes |
|---|---|
| GO VIDEO HDT 100 | 0610 |
| HITACHI 61HDX98B | 0632 |
| HUGHES HTL-HD | 0607, 0632, 0641 |
| HUGHES HIRD-E8 | 0607, 0632, 0641 |
| LG LSS-3200A | 0607, 0632, 0641 |
| LG HTL-HD | 0607, 0632, 0641 |
| MITSUBISHI SR-HD5 | 0632 |
| MITSUBISHI SRHD400 | 0632 |
| MITSUBISHI SRHD500 | 0632 |
| MOTOROLA HDT100 | 0618 |
| PHILIPS DSHD800R | 0632 |
| PIONEER SH-D505 | 0604 |
| PROSCAN PSHD105 | 0636 |
| RCA HD65W20 | 0658 |
| RCA PSHD105 | 0636 |
| RCA DTC-100 | 0636 |
| RCA DTC-210 | 0636 |
| SAMSUNG SIR-T165 | 0583 |
| SAMSUNG SIR-T351 | 0583 |
| SAMSUNG SIR-TS160 | 0619 |
| SAMSUNG SIR-TS360 | 0619 |
| SONY SATHD100 | 0623 |
| SONY SATHD200 | 0623 |
| SONY SATHD300 | 0623 |
| SYLVANIA 6900DTD | 0581 |
| TOSHIBA DST3000 | 0607, 0641 |
| TOSHIBA DST3100 | 0607, 0641 |
| TOSHIBA DW65X91 | 0607, 0641 |
| ZENITH HDSAT420 | 0634 |
| ZENITH HDSAT520 | 0634 |
| ZENITH DTV1080 | 0634 |
How to Program GE Universal Remote Without Codes
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to the device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “UP” or “Down” key continuously till the device will “Turn Off”.
- Verify the code by clicking on “Power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program GE Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First, you need to “Turn The Device On”
- Press the “TV” on your “GE universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off.
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program GE Universal Remote With Code Search
You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into the search mode by a code in the instructions.
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three-digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
Finding your key code may take a little more time using the above method, but it is very crucial. Your remote should function properly for all in-room functions once you have completed the aforementioned steps.
You will learn the correct information regarding universal remote codes from this page. Because the codes throughout this article is valid and functional. Thus, more research is not necessary.