Emerson Universal Remote Codes & Program Instructions

You can find the Emerson TV Universal Remote codes from the list below. We have the universal remote for Emerson devices in a variety of brands, and the codes for this Emerson device have been listed below. If any of those codes don’t work to configure your Emerson device, try a different Emerson TV code. Repeat this process until it does.

Below are some instructions on how to configure your Emerson device with remote control. Try one of these codes and we will surely can say that you will get one.

Contents

Emerson TV Remote 4 Digit Universal Codes

0205, 3031, 3203, 3005, 3010, 3013, 3012, 0181, 0198, 0207, 0490, 3204, 3186, 3015, 3218, 3025, 0650, 0263, 3011, 3008

Emerson TV Remote 3 Digit Universal Codes

691, 533, 720, 654, 655, 535, 657, 536, 527, 528, 534, 544, 537, 846, 672, 777, 523, 632, 526

Emerson TV Remote 2 Digit Codes

01, 03, 04, 23, 32, 34, 35, 77, 83, 84

Emerson TV Remote 5 Digit Universal Codes

10180, 13559, 11661, 13623, 11665, 12183, 10451, 11963, 10171, 10463, 11886, 11909, 11864, 11394

RCA Universal Remote Codes For Emerson TV

1004, 1006, 1012, 1023, 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039, 1041, 1042, 1043, 1044, 1046, 1047, 1048, 1049, 1073, 1123, 1124, 1162, 1171, 1177, 1179, 1191, 1196, 1208

Philips Universal Remote Codes For Emerson TV

0002, 0502, 0006, 0115, 0506, 0706, 0520, 0906, 0316, 0505, 0614, 0324, 0924, 0626, 0826, 0027, 0327, 0128, 0228, 0632, 0134, 0247, 0605, 0705, 0805, 0703, 0903, 0004, 0519, 0106, 0104, 0304, 0604, 0804, 0005, 0105, 0305

GE Universal Remote Codes For Emerson TV

0004, 0009, 0044, 0135, 0049, 0051, 0189, 0053, 0147, 0039, 0130, 0227, 0233, 0250, 0252, 0254, 0257, 0265, 0266, 0310, 0325, 0456, 0040, 0041, 0042, 0021, 0023, 0024, 0179, 0045, 0025, 0027, 0030, 0032, 0034, 0035, 0037

One-For-All Universal Remote Codes For Emerson TV

0004, 0009, 0044, 0135, 0049, 0051, 0189, 0053, 0147, 0039, 0130, 0227, 0233

How to Program Emerson Universal Remote Without Codes

All universal remote control codes are processed by the remote’s scanning procedure in the auto search method. To configure the control, it examines each code individually to determine which is the right one to use with your remote. The steps listed below should be followed:

  1. “Turn On” the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Emerson Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “Emerson universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Lastly, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s All!

Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

How to Program Emerson Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Wrapping Up

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps.

We may easily configure our Emerson device universal remote using the three methods mentioned above.

Tell us the code used to configure your device with your preferred universal remote company. Please let us know in the comment area if you can’t find the code for your remote; we’ll update it as soon as we can.

Leave a Comment