DVD Universal Remote 3 Digit Codes

With the help of the DVD Universal Remote, we may control our DVD player as well as the audio and video devices that are connected to any brand of DVD. The 3-digit device code must be entered into your DVD universal tv remote in order to run any of your DVD devices. You must look inside the battery compartment or it may be on the back of the remote if you are unable to locate the model number of your remote control.

DVD Universal Remote Codes 3 Digit

Brand Name	Codes
Advent	899
Afreey	417
Aiwa	376, 414
Akai	357, 395, 435
Ames	431
Apex	386, 390, 391, 392, 401, 424, 430, 436, 439, 445, 457, 459
A-trend	393
Audiovox	896
Axion	896
B & K	898
Blaupunkt	430
Bodysonic	417
Bose	672
Broksonic	394
Changhong	401
Cinevision	405
Classic	401, 431
Coby	317
Criterion	448
Curtis International	906
Cyberhome	393
Daewoo	440, 441, 444
Denon	362, 400, 421
Denzel	428
Digitrex	445
Disney	458
Dual	428, 446, 447
Dvd 2000	402
Elta	434, 435
Emerson	396, 405, 456, 458
Fisher	378, 416
Funai	456, 458
Ge	403, 409, 430
Goldstar	396, 405
Go-video	407, 426, 431, 455
Grandiente	415
Greenhill	430
Haaz	451, 452
Harman Kardon	427
Hitachi	404, 407, 419, 428
Hiteker	445
Infinity	417
Insignia	405, 456
Initial	430
Integra	422, 442
Jbl	427
Jvc	368, 406, 418, 901
Kenwood	400, 429
Kiss	428
Klh	430
Konka	372, 373, 374, 375, 410, 411, 412, 413
Koss	415
Lasonic	451, 454
Lenoxx	435
Lg	396, 405
Linn	443
Liteon	318
Magnavox	360, 370, 398, 408, 456, 900, 903, 904
Marantz	360, 396, 398, 405, 408, 423, 903
Memorex	446
Microsoft	403, 409
Mintek	430
Mitsubishi	364, 402
Mustek	431
Nad	396, 405, 433
Nakamichi	432
Nesa	430
Norcent	317, 318, 319, 905, 907
Onkyo	422, 892
Optimus	404
Orion	394
Oritron	377, 415
Panasonic	362, 363, 400
Pacific	446
Philips	360, 362, 370, 387, 396, 398, 400, 408, 423, 437, 755, 891
Philips-magnavox	398, 408, 423, 900, 904
Pioneer	366, 403, 404, 893, 897
Polaroid	385
Polk Audio	398, 408, 903
Portland	435
Proline	415
Proscan	365, 403, 409
Radioshack	404, 443, 449, 453, 894, 895
Reoc	451
RCA	365, 403, 409, 430, 443, 449, 453, 895
Rotel	406
Saba	894
Samsung	369, 407, 454, 455
Sampo	417
Sansui	394
Sanyo	416
Sears	394
Seg	428
Sharp	359, 397
Sherwood	425
Shinco	430
Shinsonic	430
Sony	320, 321, 322, 361, 389, 399, 909
Sylvania	456, 458
Symphonic	456, 458
Teac	404
Technics	400
Techwood	433
Tevion	388, 446, 447, 448, 449, 450, 451, 452
Theta Digital	404
Toshiba	360, 394, 398, 436, 447, 890, 902, 908
United	449
Wharfedale	417, 442
White Westinghouse	458
X-box	409
Yamaha	362, 400, 420, 900, 904
Yamakawa	428, 438
Zenith	358, 367, 396, 405, 437

Applying the unique DVD codes for DVD universal remotes, there are three ways to set up a DVD universal remote control with your devices. Therefore, follow the procedures below if you already have the 3, 4, or 5-digit universal DVD remote control codes on hand. Otherwise, continue as advised. If not, look at the table below.

How To Program DVD Universal Remote?

There are three easy ways to set up or configure a universal remote, the first of which is using a keycode. The other two are manual configuration and programming using a universal remote code for DVD search.

How to Program DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

1. Turn on the smart device you want to use the universal remote to control, such as the TV.
2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Repeatedly press the “up” or “down” key until the device turns off.
4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program DVD Universal Remote With Manual Method

1. You must first “Turn The Device On.”
2. On your DVD universal remote, press the button “TV.”
3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
6. When the screen goes dark, you can release the “Power Button.”

That’s all! Your TV should now operate flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

How to Program DVD Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is put into search mode by a code in the instructions.

1. “Turn The Device On” first.
2. Hold down the “Setup” button for a moment.
3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps.