Daewoo TV Universal Remote Codes & Program Instructions

The simplest way to configure your TV with the Daewoo universal remote control by using some codes, such as three digit codes, four digit codes, and even five-digit codes, is provided below if you recently purchased a new universal remote control for your Daewoo TV and are unaware of the remote codes.

You can try the remote codes from the list below using the instructions provided. We have all types of codes to configure remote controls and televisions simultaneously. Try another code if the first one doesn’t work for you, and so on until your remote control is synced with your television.

NOTE: If you have a recent Daewoo TV, you might just need 3-digit numbers, but if you have an older model, you might need 4-digit codes. So, use the list of codes below to search for codes.


Daewoo TV Universal Remote 4 Digit Codes List

  • 0102
  • 0505
  • 0615
  • 0905
  • 0502
  • 0415
  • 0614
  • 0002
  • 0529
  • 0611
  • 0826
  • 0046

Daewoo TV Universal Remote 3 Digit Codes List

  • 171
  • 311
  • 502
  • 415
  • 092
  • 407
  • 110
  • 102
  • 016
  • 314
  • 091
  • 016
  • 017
  • 006
  • 004
  • 018
  • 403
  • 303
  • 214
  • 127
  • 005
  • 039

RCA Universal Remote Codes For Daewoo TV

1004 , 1005 , 1006 , 1016 , 1017 , 1082 , 1127 , 1171 , 1190 , 1196 , 1202 , 1274 , 1450

GE & One-For-All Universal Remote Codes For Daewoo TV

0130, 0004, 0009, 0100, 0005, 0138, 0043, 0140, 0039, 0252, 0279, 0444, 0080, 0042, 0058, 0017, 0010, 0126, 0018, 0127, 0019

Philips Universal Remote Codes For Daewoo TV

0614, 0002, 0502, 0611, 0102, 0415, 0905, 0615, 0505, 0826, 0529, 0046, 0609, 0805, 0407, 0303, 0602, 0214, 0403, 0314, 0503

Magnavox Universal Remote Codes For Daewoo TV


How To Program Daewoo TV Universal Remote?

Actually, most of the remotes that are compatible with this Daewoo TV utilize the below approach; give it a try to program, and if it doesn’t work, try the other methods as well.

  1. Turn on the Daewoo TV and point your remote control at the screen.
  2. The memory of the remote control must be searched for the “3, 4 or 5 digits” code.
  3. Press and hold the TV button now.
  4. Hold the “OK” key while continuing to do so.
  5. You can now see that all keys “Blink Twice” when you enter the code “922.” Then, the mode key for the chosen code should also “Blink Twice.”
  6. Press and hold the “Power Button”; after waiting for the “TV Turn Off,” let go of the button.
  7. Simply press the “REW” button to simultaneously see each code reversed.
  8. Simply, click “FF” to view each code. one step ahead simultaneously
  9. The “Power” and “Play” buttons will keep the remote codes’ automatic searches going.
  10. Press “Enter” once you have a code that works.
  11. The TV key will flash “3 Times” in this instance.
  12. If no acceptable code is found, the mode button will blink in the colour “RED.”

If you find it is not helpful to program then use the below methods they might help you.

How to Program Daewoo TV Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to programme, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Daewoo TV Universal Remote With Manual Method

The universal remote may be readily configured using the keycode, which also serves to identify the make and model of your equipment.
  1. You must first “Turn The Device On.”
  2. On your “Daewoo TV universal remote,” select “TV.”
  3. So, to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Finally, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button.”

That’s it, the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Daewoo TV Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into the search mode by a code in the instructions.

  1. First of all “Turn The Device On”
  2. Now press and hold the “Setup” button
  3. Enter the “9-9-1” (three-digit) code
  4. Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed the above-mentioned steps.

We hope that the aforementioned techniques and codes have been used to configure your Daewoo television as well as your preferred remote control. For setting up Daewoo remote controls, those techniques are used.

Wrapping Up

We value your feedback, which will help us improve our website and help more people who are waiting for their remote codes. We also accept new universal remote control codes that have worked for you; please leave those codes in the comment section below, and we will share them with other users by posting them on our website.

If you require any more remote codes, please ask us in the comment box below and we will give them to you.

Leave a Comment