COX Universal Remote TV Codes & Program Instructions

Do you use a Cox universal remote? If you want to use this remote to control your television, don’t wait—just follow our instructions, enter the necessary codes, and your remote will then be programmed. You can easily control many different types of televisions, including Toshiba, Sanyo, Samsung, LG, Vizio, Sony, and many more, with the codes shown below.

The Cox remote basically uses four-digit codes. Therefore, all possible 4-digit codes for usage with the Cox remote are provided below. To enter the codes, you need to be familiar with programming techniques. the procedures listed following the codes.

COX Universal Remote Codes List

Samsung TV Cox Remote Codes

0812, 0060, 0702, 0178, 0030, 0039, 0587, 0650, 0766, 0814, 1060, 1575, 1632

Cox Codes for Vizio TV

1758, 0864, 0885, 1756, 2512

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

1. Turn on the smart device you want to use the universal remote to control, such as the “TV”.
2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program COX Universal Remote With Manual Method

1. You must first “Turn The Device On.”
2. On your COX universal remote, select “TV.”
3. So to put the universal remote in “Learning Mode,” press and hold the “Setup button” until it flashes a light.
4. Finally, key in the “Keycode” you got from the programming manual (Instructions Booklet)
5. Simply “point your remote at the TV” after finishing this step, and then “Press and Hold The Power” button.
6. When the screen turns off, you can release the “Power Button.”

That’s it, the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program COX Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into the search mode by a code in the instructions.

1. “Turn The Device On” first.
2. Hold down the “Setup” button for a moment.
3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Wrapping Up

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps.

We have listed all COX universal remote codes in this blog article, but if you have any questions about them or notice that we have missed listing any, please leave a comment and we will fix the problem as well as add the missing COX remote codes.