Coolux Universal Remote Codes & Program Instructions

Do you need codes for the Coolux TV universal remote? Finding what you need is made easier by this article. We offer all of the universal Coolux TV remote codes as well as setup instructions to help you set up the device you want to configure.

The coolest item in your living room that can control many different devices is the Coolux TV remote! Check out the procedures as well as the codes because you may also use the Coolux remote manual approach and the other remaining methods.


Coolux Universal Remote User Manual

Find the particular code that corresponds to the brand and model of your desired device now that you know how to configure your device with remote codes Coolux TV. You must be careful when selecting the proper code because each one is specific to a particular device.

The full list of universal remote codes for Coolux TV is provided below:

Note: There is no code required to use Coolux remote you just need to follow the below simple steps for any brand.

  1. Press “EST” Button on Coolux Remote for 6 seconds.
  2. Then you will see “Indicator Lamp Light”.
  3. If you see the volume symbol on your tv then Click on “SET” Button.
  4. If not, try this method again.

How to Program Coolux Universal Remote

If you’re sick of having a room full of messy remote controls that confuse you, try using only one and watch the difference. By simply configuring it with the desired device, you may make a Coolux remote control operate a variety of equipment.

We will be assisting you with the setup so that you can remain at ease. The procedures for setting up the Coolux TV universal remote are as follows:

How to Program Coolux Universal Remote With Auto Search

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

  1. Turn on the smart device you want to use the universal remote to control, such as the “TV”.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to configure, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indicators are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Coolux Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On.”
  2. On your “Coolux universal remote,” select “TV.”
  3. Now, to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. Lastly, key in the “Keycode” you got from the programming manual (Instructions Booklet)
  5. Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen turns off, you can release the “Power Button.”

That’s it, the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Coolux Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is pushed into search mode by a code in the instructions.

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”


Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed these steps.

Do you have any further Coolux TV remote-compatible codes? You may share those codes with us here, and we’ll post them for other readers to use as a guide. We appreciate your feedback and recommendations for how to make our website better and serve the needs of all users.

Leave a Comment