Bose Universal Remote Codes & Program Instructions

Are you familiar with your Bose universal remote control? if not! We are prepared to assist you by providing the greatest ways as well as many types of bose universal remote codes. Of course, there are numerous methods for programming this remote with any type of television. However, we will mention two common approaches for using this remote. If they do not appear to be functioning, try another method.

Bose Universal Remote Code For Samsung Smart TV

10030, 10037, 10163, 10178, 10370, 10519, 10556, 10618, 10650, 10702, 10812, 11060, 11235, 11249, 11312, 11458, 11584, 11619, 11630, 11903, 12051, 12094

Bose Universal Remote Code For LG Smart TV

10017, 10030, 10037, 10109, 10163, 10178, 10361, 10370, 10556, 10698, 10714, 10715, 10856, 11178, 11265, 11423, 11447, 11663, 11768, 11842, 12182, 12358, 12424, 12731, 12834

Bose Universal Remote Code For Vizio TV

10054, 10864, 10885, 11756, 11758

GE Universal Remote Codes For Bose

• 0672

Bose Universal Remote Codes List

How to Program Bose Universal Remote

Method 1: Using your BOSE Audio Remote To Control A Television

1. Switch on your TV.
2. Hit TV Button on your bose remote control.
3. Now Press System then it will display the bose System Menu on your connected TV.
4. On your media center display, you can see a pop-up that says “SYSTEM: SEE TV”.
5. So, you need to use the remote supplied with tv for selecting the video input which would allow you to see “Bose System Menu”.
6. Now from the “Bose Remote”, click on the Right arrow it will highlight “Remote Control” icon and then click on “Enter”.
7. Chose the Down Arrow to highlight the “TV Brand” and then press “Enter”
8. Then the Highlight will shift to “Right”
9. Now you need to find your TV Brand from the provided list and then hit on “Enter”.
10. Then the highlight will shift to the “Right”.
11. Now select your “TV Code” (you can find your tv remote code in the list we mentioned)
12. Then click on “TV ON/OFF” buttons.
13. If the “TV has turned off” that means you’ve successfully programmed.
14. But sometimes you might enter the wrong code so the tv won’t be turned off so at that time you need to use another code and repeat the same procedure.
15. Finally, press “Exit” to leave the system menu.

Method 2:

1. First of all find a setup code for your TV
2. Now turn your BOSE System and TV ON
3. Then press & hold the program and TV On/Off buttons for up to 3 seconds.
4. After that, your remote source buttons will light to signal that you’ve entered programming mode.
5. But now you need to use the “Number key’s” which is to enter your “TV’s Setup code”
6. To complete programming you need to press “Program”
7. After some fraction of seconds, the remote will flash once which means the program has successfully done
8. For confirmation, you can turn your tv “ON/OFF”

There are some alternative methods too if you didn’t program your remote by using the above methods.

How to Program Bose Universal Remote With Auto Search

All universal remote codes are scanned in the remote when using the auto search method. To configure the control, it scans one code at a time to discover the correct remote code that works with your remote. Follow the steps below:

1. “Turn On” the smart device, such as “TV,” that you want the universal remote to control.
2. Turn on the remote by pressing and holding the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds. The LED light shows that the device is prepared for configuration.
3. Point the remote at the device and press the “CH+” and “CH-” buttons. The remote will display on/off signals. Continue to press the “up” or “down” key until the gadget turns off.
4. Verify the code by pressing the “power” button. The device should power on. If it starts, try changing the channel to ensure that the remote is properly programmed.
5. To save the code, tap the “device” button. The device’s LED will blink twice to confirm the code recorded.

How to Program Bose Universal Remote With Manual Method

1. You must first “Turn The Device On.”
2. On your Bose universal remote, select “TV.”
3. So to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
4. At last, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
6. When the screen dims, you can release the “Power Button.”

That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Bose Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

1. “Turn The Device On” first.
2. Hold down the “Setup” button for a moment.
3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Wrapping Up

The above procedure may take a little longer, but it is critical to find your key code. After you’ve completed the above steps, your remote should be functional for all in-room functions. We’ve included a comprehensive list of codes for your universal remote. We’ve also walked you through the various methods for programming your universal remote.

We hope the universal remote codes and programming methodologies were helpful.

If you have another device, you can search for it in the top bar. Alternatively, you may go to our site and search for them by topic or brand.