Blackweb DVD Player Universal Remote Codes

Are you seeking ways to make using your home entertainment system more straightforward? You can get rid of all the difficulties and relax in the convenience of your own home. Several entertainment systems can be controlled by the Blackweb DVD remote. With the aid of universal Blackweb DVD remote codes, anything is possible.

You may control all of your devices with just one remote by entering the ideal code for them. Find the proper code that perfectly suits your device from the comprehensive list of codes we offer here, then begin Blackweb DVD remote programming.


Blackweb DVD Universal Remote Codes List

All of the Blackweb DVD codes that we offer here are compatible with the manufacturer and model of the gadget that you want to configure with the Blackweb DVD universal remote. During setup, the universal Blackweb DVD remote’s list of codes will be used. You never have to worry about running out of codes because we compile the entire list for the kind and model of the device you want to configure.

Check the list below for the precise code you require.

Brand Name DVD Codes
BROKSONIC0394, 2103, 1780
EMERSON0456, 1877
FUNAI0456, 1877
INSIGNIA0456, 1877, 1406, 1408, 1135, 1407
JVC0923, 2342
MAGNAVOX1877, 0456
MEMOREX0394, 2103, 1780
PANASONIC0456, 0437, 2144, 2174, 0148
PHILIPS0204, 2081, 1975, 0456, 1877
SANSUI0394, 2103, 1780
SYLVANIA0456, 1877
SYMPHONIC0456, 1877
TOSHIBA0394, 0924, 2103, 2346, 1780

How to Program Blackweb DVD Universal Remote Codes

You may set up your device with the Blackweb DVD player codes in only a few minutes. The directions are simple to understand. The Blackweb DVD universal remote can be properly programmed by simply following the step-by-step instructions. Things are simple to complete on your own. Ensure that everything you need, including the device and remote, is functional.

To input for Blackweb DVD universal remotes, follow the steps below:

How to Program Blackweb DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To configure the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  3. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  4. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  5. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  6. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Blackweb DVD Universal Remote With Manual Method

The universal remote may be readily configured using the keycode, which also serves to identify the make and model of your equipment.
  1. You must first “Turn The Device On.”
  2. On your “Blackweb DVD universal remote,” select “TV.”
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. At last, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen turns off, you can release the “Power Button.”

That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Blackweb DVD Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  1. First and obviously, “Turn On The Device.”
  2. Now, hold down the “Setup” button.
  3. Enter the “9-9-1” (three-digit) code. Now, hold down the “Power Button” on the remote and then push the Channel up button until the device, in this case, your television, “Turns Off.”

The above procedure may take a little longer, but it is critical to find your key code. After you’ve completed the above steps, your remote should be functional for all in-room functions.


What did you think of the directions in this article? Have you chosen the proper code that you require? We would like to hear from you if you felt that this post was helpful. Please elaborate on the specific code you typed and which device it relates to. Other readers’ experiences could be similar to yours and assist them as well.

Leave a Comment