Axess TV Universal Remote Codes & Program Instructions

by

If you’ve purchased a new universal remote control for your Axess TV and are unsure of the remote codes, then the following instruction will show you how to program your television using three-digit, four-digit, and even five-digit codes.

You can try the remote codes from the list below using the instructions provided. We have all types of codes, such as the axess tv remote code 5 digit to configure the remote control and television simultaneously. Try another code if the first one doesn’t work for you, and so on until your remote control is synced with your TV.

Contents

Axess TV Universal Remote 4 Digit Codes List

  • 1005
  • 1113
  • 1476
  • 1053
  • 1110

Axess TV Universal Remote 3 Digit Codes List

  • 711

How To Program Axess TV Universal Remote?

In reality, each brand has a different process for finding your Axess TV remote code. In this section, we’ll show you how to search for codes for your Axis TV. Give it a shot, and if it doesn’t work for your TV, try one of the alternative methods below.

  1. Simply click “Release” after pressing the “TV Button”.
  2. Keep pressing and holding the button until, after a short while, the “Red LED Flashes Twice,” at which point you can let go.
  3. Enter a three-digit code now (9-9-1) (On your remote you can see two blinks)
  4. Once the device is “Turned Off,” slowly push the “Power TV” and “Device TV” buttons.
  5. When conducting a search, you must ensure that “the remote should be aimed at your device”.
  6. Now, in order to search the complete “library of codes,” you might need to hit these button combinations more than once.
  7. You must “Press” the “setup button” and then release it to save the code for your TV every time it is turned off.

If you find it is not helpful to program then use the below methods they might help you.

How to Program Axess TV Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto search procedure. To program the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the directions below:

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to program, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
  5. To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Axess TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On”.
  2. On your “Axess TV universal remote,” select “TV”.
  3. In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. At last, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button”.

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Axess TV Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off”.

The above procedure may take a little longer, but it is essential to locate your key code. After you’ve completed the above steps, your remote should be functional for all in-room functions.

We hope the following methods and codes helped you configure your Axess television as well as your favourite remote control. These methods are used to configure Axess remote controls.

Wrapping Up

We appreciate your feedback, which will help us improve our website and help more people who are waiting for their remote codes. We also accept new universal remote control codes that have worked for you; please leave those codes in the comment section below, and we will share them with other users by posting them on our website.

If you require any more remote codes, please ask us in the comment box below and we will give them to you.

Leave a Comment