Axess Soundbar Universal Remote Codes

Are you having a little trouble setting up the Axess soundbar remote? You can find all the information you need for a smooth setup process in this post. All you need are the instructions and the universal remote codes for the Axess soundbar player, which we will go over. The results you get from reading this post will be fantastic for your ultimate home entertainment system experience.

Check out the methods and codes listed below for simple instructions on how to configure your soundbar and enter the codes in your remote.


Axess Soundbar Universal Remote Codes List

Unique universal Axess soundbar remote codes are the secret to programming your favourite remote to use with different devices. You may find all the codes you might require here. If you wish to configure a device with the Axess soundbar remote, just make a note of the manufacturer and model. You can then look them up here. The list of required Axess soundbar universal remote codes is as follows:

  • 3593
  • 711
  • 1005
  • 1053
  • 1110
  • 1113
  • 1476
  • 0049

How to Program Axess Soundbar Universal Remote

Relax as we walk you through the simple procedures for programming the Axess soundbar universal remote. You might not require a professional technician’s assistance to set up your device.

To correctly configure your device, follow these steps:

How to Program Axess Soundbar Universal Remote With Auto Search

All universal remote codes are scanned in the remote during the auto search procedure. It scans one code at a time to discover the correct remote code that works with your remote to configure the control. Follow the steps below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Axess Soundbar Universal Remote With Manual Method

The universal remote may be readily configured using the keycode, which also serves to identify the make and model of your equipment.
  1. You must first “Turn The Device On”.
  2. On your “Axess Soundbar universal remote,” select “TV”.
  3. To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. At last, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen turns off, you can release the “Power Button”.

That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Axess Soundbar Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off”.

It may take a little longer to find your key code using the above method, but it is very important. After completing the aforementioned steps, your remote should function properly for all in-room functions.

Final Words

A wide list of codes for your universal remote has been provided. Additionally, we have walked you through each step of the various ways to program your universal remote.

We sincerely hope that the universal remote codes and programming techniques were successful for you.

Use the search function in the top bar to locate any other devices you may have. As an alternative, you can visit our site and go through the brands or categories to find them.

Leave a Comment