Avera Universal Remote Codes & Program Instructions

We also have universal remotes for Avera televisions; if you already have one, browse through the list below to find the Avera universal remote code for your preferred device. We also discussed simple ways to configure your universal remote. So why wait? Simply follow them immediately.


Avera TV Universal Remote Codes List

After getting the code from the list below, enter it into your remote control to configure your Avera television.

Brane NameRemote Codes
AT&T (U-Verse)1043
Direct TV 12397, 10030
Dish Network 0030
RCA Universal 0030

Avera Universal Remote 3 Digit Codes

  • 840
  • 929
  • 174
  • 046
  • 000
  • 021

Avera Universal Remote 4 Digit Codes

  • 0174
  • 0151
  • 1317
  • 1361
  • 1100
  • 0046
  • 1174
  • 0019
  • 5279
  • 1091
  • 1126

Avera Universal Remote 5 Digit Codes

  • 10046
  • 11508

GE Universal Remote Code For Avera TV

  • 174
  • 0174
  • 5279
  • 0151

One-For-All Universal Remote Codes For Avera TV

  • 2397
  • 2049

How to Program Avera Universal Remote Without Codes

All universal remote codes are scanned in the remote when using the auto search method. To configure the control, it scans one code at a time to discover the correct remote code that works with your remote. Follow the instructions outlined below:

  1. Turn on the smart device you want to use the universal remote to control, such as the TV.
  2. To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to program, according to the LED light.
  3. Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  4. Click the “power” key to confirm the code. It should start up. To make sure the remote is configured properly, try switching channels if it starts.
  5. To save the code, tap the “device” button at this time. For confirmation of the stored code, the LED on the device will blink twice.

How to Program Avera Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  1. You must first “Turn The Device On”.
  2. On your “Avera universal remote,” select “TV”.
  3. In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. At last, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen goes dark, you can release the “Power Button”.

That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Avera Universal Remote With Code Search

If you can’t locate the correct key code for the device at the time, you can configure your universal remote to look for it. It’s a manual code that puts the remote in search mode.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off”.

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the functions.


This is the greatest blog for finding all different kinds of Avera universal remote codes; all you need to do is check the name of your device before obtaining the code, which may be a four- or five-digit number, and your remote will then be configured to work with your device. You can work effortlessly now.

Leave a Comment