Every type of universal remote control code is mentioned, including GE universal remote, Auria TV remote code directv, and more. If you’re looking for these or any other remote codes to program with your Auria TV, this is the ideal place to do it.
Why wait? Check the codes and apply them in accordance with the ways listed below since we have addressed all types of codes and programming techniques in this blog post.
Contents
Auria TV Universal Remote 5 Digit Codes
- 11423
- 10178
- 11265
- 10017
- 12277
- 10856
- 11178
- 12087
- 12014
Auria TV Universal Remote 4 Digit Codes
- 4926
Almost all remotes will function fine with the below way, so test it with the above codes first, and if it doesn’t work, try the alternative methods below.
- First, turn on your “TV.”
- Then press the “Hold” TV and “SET” buttons at the same time for up to 3 seconds.
- Following that, the button will “blink with a light.”
- You must point the remote at the TV and enter a “3 or 4 or 5 digit code” using that “Button light.”
- Now, tap the “Volume + button” to confirm, and the volume should be turned up.
- Finally, click the “TV” button to save the codes; check the button for confirmation; it will blink twice.
How to Program Auria TV Universal Remote Without Codes
All universal remote codes are scanned in the remote during the auto search procedure. It scans one code at a time to discover the correct remote code that works with your remote to configure the control. Follow the steps below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Auria TV Universal Remote With Manual Method
- To begin, “Turn On The Device”.
- On your “Auria TV universal remote,” press the “TV” button.
- Now, press and hold the Universal Remote’s “Setup button” until it flashes (this indicates that it is in “Learning mode”).
- Finally, enter the “Keycode” that you found in the programming instructions (Instructions Booklet)
- After that, simply “aim your remote at the TV” and then “Press And Hold The Power” button.
- When the screen turns off, you can release the “Power Button”.
That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.
How to Program Auria TV Universal Remote With Code Search
You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.
- “Turn The Device On” first.
- Hold down the “Setup” button for a moment.
- Type the three-digit “9-9-1” code.
- As soon as the device, in this example, your TV, “Turns Off,” press and hold the “Power Button” on the remote control.
It may take a little longer to find your key code using the above method, but it is very crucial. After completing the aforementioned steps, your remote should function properly for all in-room functions.
We hope the methods and codes mentioned above have helped you configure your Auria TV and/or your preferred remote control. For Auria TV remote control configuration, those techniques are employed.
Final Words
If you like this article, please leave us a comment; it will help us improve our site and reach more aspirants who are waiting for their remote codes. We also accept new universal remote control codes that are working for you; please leave those codes in the below comment section and we will forward them to other users by posting them on our site.