Apex DVD Player Universal Remote Codes

Are you looking for universal remote controls for Apex DVDs? The codes you need to program the Apex DVD remote are provided in this post. The entire list of universal Apex DVD remote codes that you require for setting up the device is available from us. No matter what brand or model your device is, it only needs to be programmed with a single code to function with the Apex DVD remote.

It would be simple to set up the universal remote once you have chosen the precise code you require. You can avoid the hassle of using various remote controls by using apex universal codes and setup instructions.


Apex DVD Universal Remote Codes List

Check out the Apex DVD universal remote codes list and choose the precise code that corresponds to the manufacturer and model of your device if you want to start configuring the gadget. There are many codes available for selection. Continue attempting if you entered an invalid code until you were successful. The complete list of Apex DVD codes is provided below:

Apex DVD Player Universal 4 Digit Remote Codes

  • 2316
  • 2229
  • 2001
  • 2057
  • 2098
  • 2095
  • 2262
  • 2250
  • 2061

Apex DVD Player Universal 3 Digit Remote Codes

654, 655, 743, 744, 757, 386, 390, 391, 392, 401, 424, 430, 436, 439, 445, 457, 459, 372, 373, 374, 081, 082, 084, 087

Apex DVD Player Universal 5 Digit Remote Codes

50402, 52405, 53702, 54202, 56107, 58404, 59407, 59603, 50219, 50611, 51016, 52310, 52418, 54019, 56711, 58233, 58939

How to Program Apex DVD Universal Remote

Apex DVD remote control codes are crucial for configuring the desired device. It would be difficult to program the Apex DVD universal remote without the code. If you already have the special code required, you may begin the setup process according to the simple instructions we have prepared for you. To configure the Apex DVD remote control, stick to the steps listed below:

How to Program Apex DVD Universal Remote Without Codes

All universal remote control codes are processed by the remote’s scanning procedure in the auto search method. To program the control, it examines each code individually to determine which is the right one to use with your remote. The steps listed below should be followed:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Apex DVD Universal Remote With Manual Method

The universal remote may be readily configured using the keycode, which also serves to identify the make and model of your equipment.

  1. You must first “Turn The Device On”.
  2. On your “Apex DVD universal remote,” select “TV”.
  3. In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  4. At last, key in the “Keycode” you gathered from the programming manual (Instructions Booklet)
  5. Simply “aim your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  6. When the screen dims, you can release the “Power Button”.

That’s it; the universal remote control will now operate your TV flawlessly. If it still doesn’t work, try repeating the process with a new code from the same section of the reference table.

How to Program Apex DVD Universal Remote With Code Search

You can set your universal remote control to search mode if you are unable to find the key code that operates the gadget at that moment. There is a manual code that causes the remote to enter the search mode.

  1. “Turn The Device On” first.
  2. Hold down the “Setup” button for a moment.
  3. Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off”.

Finding your key code may take some time using the above method, but it is very crucial. Your remote should function properly for all in-room functions once you have completed the above-mentioned steps.


Please give us a feedback about this topic. Have you entered the right code and successfully done with the setting up process. We’d like to hear from you which code have worked with what device. If you have other universal remote control to be programmed, keep visiting this site to know more about additional codes.

Leave a Comment